ADJUSTING AIR SCREW ON ELECTRIC START PX

[GS JOHN]

Hi, i am looking for advice to adjust carb air screw on a px where the electic start gets in the way. I have cut down a 7mm spanner and by holding it with long nosed pliers I can get just a few degrees of turn between dropping it 9 out of every 10 attempts. any easy options? I have just joined this site so may struggle to find replies, so emails to magandjohnrob@sky.com would be appreciated. thanks GS John

[Worz]

Hi John,
 I just use a short open ended 7mm angled spanner. Turn it as far as I can, then reverse the spanner. It's painful to do, and as you say, sometimes I drop the spanner.

 I've always wondered if one of the flexible screwdrivers with a socket attachment on it would work.